DS010
Issue 01
Step 7 Step 8
Pull out the Clips and release the two Cross Braces from their
stowed position.
Fit the Horizontal Brace over the retaining studs.
Step 9 Step 10
Swing out each Diagonal Brace over to the opposite Leg.
Secure each Brace onto the retaining studs using the ‘R’ Clips
provided, In a downward position.
Step 11 Step 12
With bent Legs and a straight back, lift the Platform firstly to waist
height, then using your arms to offer it to the roof and lift it into
position.
NOTE:
Pay particular attention to the balance of the Platform, the
position of the handhold and the way the Claw Foot grips while
taking a second handhold.
Adjust the height by removing the two Leg Pins and Lifting the
Platform up the roof to the desired height and replace both Leg
Pins remembering to also replace the safety ‘R’ Clips provided.
Ensure the Platform is level.
Step 13 Step 14
The Feet maybe adjusted in 25mm increments but in extreme
cases either Leg can be adjusted Independently. Fit the Pin and ‘R’
Clip to secure.
Fit the back Legs by removing the middle Pin first,
holding onto it and lowering the Brace.
