EAS Electric M-THERMAL 2 BIBLOCK Instruction Manual Download Page 53

Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance  and repair requiring 
the assistance of other skilled personnel shall be carried out under the supervision of the  person competent in the use 
of flammable refrigerants. 

WARNING

Caution:Risk of fire/

flammable materials

02

Read these instructions carefully before installation. Keep this manual in a handy for future peference.

Improper installation of equipment or accessories may result in electric shock, short-circuit, leakage, fire or other 
damage to the equipment. Be sure to only use accessories made by the supplier, which are specifically designed for 
the equipment and make sure to get installation done by a professional.

All the activitie described in this manual must be carried out by a licensed technician. Be sure to wear adequate 
personal protection equipment such as gloves and safety glasses while installation the unit or carrying out 
maintenance activities.

Contact your dealer for any furthur assistance.

INFORMATION

i

1 SAFETY PRECAUTIONS

The precautions listed here are divided into the following types.They are quite important, so be sure to follow them carefully.

Meanings of DANGER, WARNING, CAUTION and NOTE symbols.

Indicates an imminently hazardous situation which if not avoided, will result in death or serious injury.

DANGER

Indicates a potentially hazardous situation which if not avoided, could result in death or serious injury.

WARNING

CAUTION

Indicates a potentially hazardous situation which if not avoided, may result in minor or moderate injury. 
It is also used to alert against unsafe practices.

Indicates situations that could only result in accidental equipment or property damage.

NOTE

Explanation of symbols displayed on the indoor unit or outdoor unit

WARNING

CAUTION

CAUTION

CAUTION

CAUTION

This symbol shows that this appliance used a flammable refrigerant. If the refrigerant is
leaked and exposed to an external ignition source, there is a risk of fire.

This symbol shows that the operation manual should be read carefully.

This symbol shows that a service personnel should be handling this equipment with
reference to the installation manual.

This symbol shows that a service personnel should be handling this equipment with
reference to the installation manual.

This symbol shows that information is available such as the operating manual or
installation manual.

V.2

Summary of Contents for M-THERMAL 2 BIBLOCK







































































































Reviews: