EAS Electric EMRH608VRT-W, Instruction Manual

Page: 27 / 58

TROUBLE SHOOTING
Fault Cause Solution
Light on, but
motor does
not work
The blades are blocked.
The capacitor is damaged.
Replace capacitor.
The motor is damaged. Replace motor.
Replace motor.
The internal wiring of motor is
cut off/ disconnected. An
unpleasant smell may be
produced.
Both light and
motor do not
work
Apart from the above mentioned, check the following:
Light damaged.
Replace lights.
Power cord loose.
Connect the wires as the
electric diagram.
Oil leakage
Outlet and the air ventilation
entrance are not tightly sealed. Take down the outlet and seal with
glue.
Vibration
The blade, if damaged, can
cause vibrating.
Replace the blade.
The motor is not tightly
fastened.
The cooker hood is not tightly
fixed.
Insufficient
suction
Readjust the distance.
The distance between the
cooker hood and the cooker
top is too large.
Too much ventilation from open
doors or windows.
The
machine
Choose a new place to install the
appliance or close some doors/windows.
inclines
The fixing screws are not
tight enough.
Tighten the fixing screw and make
it horizontal.
The hanging screws are not
tight enough
Tighten the hanging screw and
make it horizontal.
Check the blades.
2 3 4
5 6 7 8
9 10
Fix the cooker hood tightly.
Fasten the motor tightly.
13 V.6