EAS Electric EMEGN20L, Instruction Manual

Page: 42 / 110

Installation and connection
1.
This appliance is only intended for
domestic use.
2.
This oven is intended for built-in use only.
It is not intended for counter-top use or
for use inside a cupboard.
3.
Please observe the special installation
instructions.
4.
The appliance can be installed in a 60cm
wide wall-mounted cupboard.
5.
The appliance is fitted with a plug and
must only be connected to a properly
installed earthed socket.
6.
The mains voltage must correspond to
the voltage specified on the rating plate.
7.
The socket must be installed and
connecting cable must only be replaced
by a qualified electrician. If the plug is no
longer to accessible following installation,
an all-pole disconnecting device must be
present on the installation side with a
contact gap of at least 3mm.
8.
Adapters, multi-way strips and extension
leads must not be used. Overloading can
result in a risk of fire.
The accessible
surface may be hot
during operation.
41
V.5