Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1.
Press O
N
button
2.
Press P (Programs) button for more than 5 seconds.
3.
Display will show H1. Then, press time delay
and the display will show
D1. Press again P (Programs) button and the display will show the
following sequence:
D1->D2->D3->D4->D5->D1.
More bigger number is,
more you fill with rinse aid.
4.
Select with P (Programs) button
the set
ting
and it will automaticaly keep
the
set
ting selected.
Filling The Rinse Aid Reservoir
3
Close the cap after all.
1
2
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.
V.2
