Check before turning on the machine
Check if the power wire is under good condition.
The product adopts 220V~240V 50Hz AC power supply, before use, please
confirm if the rated current of the power socket meets the local require-
ments, otherwise, please replace it with the qualified socket.
Placement of the machine
Uneven place may possibly cause the turnover switch at abnormal position,
then the heater can’t work after turning on, therefore, please put the heater
on the flat place.
Operating
the machine
Temperature control knob
Insert the plug into the power socket, then turn the Temperature Control knob
clockwise, when hearing the “pop” sound (it means the temperature controller
is on), adjust the Temperature Control knob to the desired temperature level.
Power selection knob
Turn the Power selection knob to select between 5 functions: II 2000W
(High+Fan on), I 1200W (Low+Fan on), 0(Off), I 1200W (Low+Fan off), I 2000W
(High+Fan off).
Shutdown
Turn
the
power
selection
knob
to the
OFF
position
, and turn the Temperature
Control knob anticlockwise to the initial position.
If the appliance is not to be
used any more, unplug it and store it only after it has cooled down.
SAFETY
Overheat protection
The overheat safety device on the appliance shuts off the heater if it overheats
due to abnormal conditions. If this occurs, turn the heater off using the selector
wheel, unplug the heater and check that there are no objects on or near the
appliance that may have caused the overheating.
Allow the appliance to cool down, plug it back in and continue normal
operation. If the overheating persists, contact your service representative for
inspection.
Tilt protection
When the whole heater is inverted, the safety system will automatically cut off
the power, and return to the work state before inversion after the body is
placed upright.
Additional features
Carrying handles: To make it easier to move from one room to another, you can
use the handles on each side of the heater.
7
V.1
