2.2. Advanced Parameter Configuration for Remote Controller
1) Configuration Method:
Parameters can be set in the state of power on or off.
①
Long press and at the same time for 8 seconds
to enter the advanced parameter settings page,"C1" will be
displayed in the temperature display area (see Figure 4.6).
Press to exit the advanced parameter settings status.
Field Settings
②
Press ▲ and ▼ to adjust the parameter code;
③
Press to enter the parameter setting interface, then press
the "▲" and "▼" keys to adjust the parameter value, refer to the
advanced parameter setting list to select the setting para-
meters. (see Figure 4.7);
Figure 4.7
Figure 4.6
24
