Step 4
：
Enter the interface of “Add device”, click “AP Mode” in the top right corner, it will
enter interface of “Add Device” under AP mode. Confirm the controller to select
the
AP network connection mode (icon “
▄ ▅ ▇
”
is in slow blinking), click “Confirm
indicator slowly blink”. Then it will Pop up the WIFI connection interface, input
the
WIFI password which must be the same as the password of WIFI connected
to the
phone, click “confirm”, then it will pop up “connect your mobile phone to
the
device’s hot spot”, click “Go connect”. It will enter into the connection
interface of
phone WIFI, connect the “SmartLife-XXX”, as per picture shown:
SmartLife-801A.
After connected successfully, return “Smart Life” APP, the APP
will enter into the
device connection status automatically, it will complete until
the loading up to100%.
9
V.1
