EarthX ML-1 Manual Download Page 5

E T X   S E R I E S   L I T H I U M   B A T T E R I E S  
 

 3 

Environmental Rating (with case) 

IP 52(dust and dripping water) 

Operating Temperature 

-30 °C to +60 °C 

Storage Temperature 

-40 °C to +70 °C 

 

Ensure positive cable clamp and battery terminal does not touch any metal part of the 

vehicle 

If the Jump Pack gets hot while charging, stop charging and discontinue use 

Never expose the Jump Pack to fire or temperatures above 158 F (70 C) 

Never disassemble the unit 

Never allow the Jump Pack power pack to get wet 

 

 

FAQs 

Despite the simplicity of operation, you may encounter situations where the Jump Pack does 

not operate as expected. Here are some potential issues you may encounter with the 

appropriate troubleshooting procedures. 

 

Q. 

How to turn on the USB port? 

A. 

The Jump Pack needs to be “turned on” for the USB port to operate.  To turn on the Jump 

Pack press the power on button for one second and verify the charge level indicator lights 

are lit.  The Jump Pack (USB port) will shut-off automatically after a few minutes of no use. 

 

Q. 

How many times can the Jump Pack charge my phone before needing to recharge the Jump 

Pack (i.e. iPhone 5)? 

A.

 

5-8 times 

 

Q. 

How many times can the Jump Pack, jump start, a vehicle before needing to be recharged? 

A. 

This depends on many factors like the vehicle’s battery condition, the vehicles’ required 

cranking amps, and the size of the vehicle battery.  For motorsports vehicles it could be 

more than 20 times, whereas a car with a drained 100Ah battery maybe only 5 times. 

Summary of Contents for ML-1








Reviews: