SR 314
Basket
Internal
Stainless
Windscreen
Microphone
Body
2
3
Exploded View of the SR314
External Stainless Screen
Dual Stainless Pop Filter
Cleaning the SR314
All cleaning should be done with either alcohol wipes, or with
a small amount of alcohol on a soft cloth. Make sure any cleaned
elements are completely dry before reassembling.
a. First unscrew the top half of the microphone (the basket)
see “a” below.
b. Cleaning the External Stainless Screen - unscrew the
external stainless screen as shown in image “b” below.
c. Cleaning the Dual Stainless Pop Filter - both sides can be
cleaned, but most of the dirt will be on the side facing the
external screen (see “c” below).
d. Internal Stainless Windscreen - it would be extremely rare
if the internal windscreen should ever need cleaning, but it
may be cleaned if the need arises. As this windscreen is
very close to the microphone element, be extra careful that
the windscreen is dry before reassembly (see “d” below).
a. Basket
b. Clean external
stainless screen
c. Clean dual
stainless pop
filter if necessary
d. Cleaning of the
internal stainless
windscreen should
not be necessary
with normal use
Do Not attempt to
disassemble the
microphone section,
as it cannot be
opened
Summary of Contents for SR314
Page 2: ......
