Auger
(Fig. 9)
CAUTION
Check fasteners before each use. A
loose auger can result is excessive vibration and
damage the snow thrower.
To replace the auger:
Remove cover (39), pulley frame (38) and belt (35).
Loosen the nut from the other side of the auger (42)
and dismount the pulley (37) and auger axle (41).
Replace the auger with a new one.
Ensure all screws and nuts are properly tightened.
Scraper blade
(Fig. 10)
The scraper blade is a wear item and should be replaced
when necessary. A worn scraper blade can cause
extreme vibration and damage the auger.
To replace the scraper blade:
Undo the three (3) screws.
Replace the scraper blade with a new one.
Secure with the three (3) screws.
Ensure the screws are properly tightened.
12
MAINTENANCE AND STORAGE
