WARNING:
Before carrying out maintenance operations, disconnect power supply.
Failure to heed this warning
could result in serious personal injury.
Before each use
check the extension cord for
signs of damage or aging. Replace the cable if it is
cracked, split or otherwise damaged. Check the
condition of the dethatcher and ensure that all
threaded connections are securely tightened.
CAUTION:
Always clean the dethatcher after each
use. Failure to carry out proper cleaning can result
in damage to the dethatcher or result in poor
performance.
Always store this unit on a steady surface, and block
the wheels to prevent it from rolling. Tilt
the
appliance
forward.
Clean the underside of the housing around the
blades and the safety flap with a scrubbing brush
or rag. Never splash with water!
Stand the appliance on its wheels again, clean the
ventilator and any remaining grass or dirt.
Replace worn or damaged parts with original
replacement parts only. Parts from another
dethatcher may not fit properly causing an unsafe
situation.
Make sure all protective devices are secure and in
good condition. Repair or replace if necessary.
WARNING:
Injury can occur while working on the
raker. Wear protective gloves.
Rear Wheels Removal and Installation
(Fig. 9)
To remove the rear wheels from the unit, unscrew the
shaft, pry out wheel caps, remove the rear wheels
from the shafts. Reverse above steps to install wheels.
MAINTENANCE
8
Model DT71212
STORAGE
Store the Dethatcher in a dry, clean area out of reach of
children.
During extended periods of storage, ensure that the
dethatcher is protected against corrosion and rust.
At the end of the season, or if the dethatcher is not being
used for longer than a month, wipe all metal surfaces with
an oil impregnated cloth to protect them from corrosion or
spray with a fine coat of oil. Fold the upper handle down,
and store the dethatcher in a suitable place.
Fig
.
9