EarthWise 60318, Operator'S Manual

Page: 15 / 22

If environment is dusty,also wear a dust mask.
battery is removed from the battery compartment and the
switch key is removed.
REPLACING THE CUTTING BLADE
See Figures 12 - 13.
Stop the motor and remove the switch key. Allow blade
to come to a complete stop.Remove battery from the
battery compartment.
NOTE: Only use identical replacement blades.
Fig.12
To keep your drive system working properly, the gear case
and area around the drive should be kept clean and free of
trash build-up.
The gear case is filled with lubricant to the proper level at
the factory. The only time the lubricant needs attention is if
service has been performed on the gear case.
GEAR CASE
BLADE
BLOCK OF WOOD WRENCH