Assembly and Operation Instructions
M80_REV_JUL_2022
PAGE 5
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation of this spreader.
(Practice the following steps)
Turn the motor switch to the
“ON”
POSITION, so that the impeller is turning before going on to the next step.
While driving forward turn the ECM Control switch (wide top switch) to the
“ON”
POSITION, this opens the shut off
plate on the spreader.
To stop the flow of material, turn the ECM Control switch to the
“OFF”
POSITION, then turn the motor off when
finished.
When finished empty any remaining material from hopper.
Thoroughly wash spreader and allow to dry before storing. Lubricate all moving parts with a graphite or silicon spray.
CUSTOMER SERVICE
SUPPORT@EARTHWAY.COM
|
www.EARTHWAY.com
| 1009 Maple Street, Bristol, IN 46507
ONE YEAR WARRANTY
EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of one year to the
end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion
will repair or replace the part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling,
misuse, tampering, or normal wear and tear as determined by EarthWay.
EarthWay at its discretion may require that the part(s) or product be returned along with the original purchase receipt for
examination and compliance with the terms of this warranty. Do not return any product without first receiving authorization from
EarthWay Products, Inc.
To seek remedy under this warranty, contact EarthWay Products, Inc. at support@earthway.com or write to EarthWay
Products, Inc. 1009 Maple Street, Bristol, IN 46507 and describe the nature of the manufacturing defect. SPECIFIC
LIMITATIONS: This warranty covers only the part(s) or product; any labor charges associated with repair or replacement of
non-conformances are specifically excluded. Due to the corrosive nature of most fertilizers and ice melt products, EarthWay
Products, Inc. makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or
its effects.
EC DECLARATION OF CONFORMITY
(Machinery Directive & Electromagnetic Compatibility Directives)
Herewith we declare that the machinery described below is in accordance with the relevant
health and safety requirements of the EC Council Directives concerned with Machinery and
Electromagnetic Compatibility. No alterations are to be made to the machine without prior consultation and approval
of Earthway Products, Inc. otherwise the Declaration may become invalid. This equipment must be commissioned,
used, and maintained strictly in accordance with the operating and maintenance instructions issued with the
machine. Operators must be trained in accordance with the recommendations given in the operating and
maintenance instructions issued with the machine.
Description of Machine:
EarthWay
®
M80 12-volt Broadcast Spreader