Calibrating your spreader:
To start your Calibration
1. Open shut-off fully so that the holes in the bottom of the hopper are
open completely.
Fig 1
2. Move the Rate Control Stop to #30 and tighten, then move the Rate
Control Handle to #30.
Fig 2
3. Adjust the nuts on the pivot to lock the calibration control rod into
position.
Fig 3
N
OW
YOU
ARE
NOW
READY
TO
USE
YOUR
SPREADER
.
C25 Series
Tow Broadcast Spreader
Assembly/Owners Manual
WARRANTY
EarthWay
guarantees this product to be free of defects in original
workmanship and materials for a period of 90-days from sale to the origi-
nal user. If any defect develops during this period
EarthWay
will re-
pair or replace this product at no charge provided the defect is not the re-
sult of mishandling or tampering and that this product is received at the
factory with shipping charges prepaid. For quicker service you may call
EarthWay
at
(574) 848-7491 & 800-294-0671
or write and de-
scribe the nature of the defect and we will send repair parts to you. Due to
the corrosive nature of most fertilizers and ice melters,
EarthWay
PRODUCTS, INC. makes no warranty or guarantee against corrosion fail-
ure on models with plated steel or painted steel frames. Clean and dry
your spreader well after each use. Warranty covers parts only, no labor
charges.
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation of
this spreader and make sure the shut-off is closed completely.
1. Obtain proper setting for material to be used from the
RATE SETTING MATRIX included with this spreader.
2. Move stop bolt on rate gauge assembly to the proper set-
ting.
3. While pulling spreader forward, pull control lever forward
to stop bolt.
4. To stop, push lever backward to close flow holes before
you stop moving.
5. When finished, empty any remaining material from hop-
per.
6. Thoroughly wash spreader and allow to dry before storing.
No oiling is necessary.
HOW TO ORDER SPARE PARTS
All spare parts listed herein may be ordered direct from the
manufacturer,
EarthWay
PRODUCTS, INC.
Be sure to give the following information when ordering.
1. Model Number
2. Part Number
3. Part Description
Call (574) 848-7491 or 800-294-0671, or
email: [email protected], write for current prices.
DO NOT RETURN TO DEALER FOR REPAIR
Contact:
EarthWay
PRODUCTS, INC.
1009 Maple Street
P.O. Box 547
Bristol, IN 46507
FOR YOUR RECORDS
_________________________________________
Date Purchased
_________________________________________
Store Name
The settings furnished on the Rate Setting Chart are intended as a guide
only. Variations in physical characteristics of material applied, walking
speed, and roughness of ground surface may require slightly different
spreader settings.
Due to the above conditions,
EarthWay
PRODUCTS, INC. makes no
warranty as to the uniformity of coverage actually obtained from the set-
tings listed.
