ASSEMBLY and OPERATING INSTRUCTIONS
for
EarthWay
MODEL 6500W
1. Remove and identify all loose parts from carton
2.
N
OTE
:
Slight bend in handle bracket (15) to face outward. Install handle bracket (15) to inside of wood handles (3). Insert 5/16-18 x
1½” bolts (7) through holes in wood handles then through holes in handle bracket, fasten using 5/16-18 hex nut (6)
3. Insert 5/16-18 x 5’ axle bolt (14) through hole in handle bracket (15). Now insert the bolt through hole in the straight end of frame (8).
Place axle (16) into center of wheel (10). Now put axle bolt through the axle, then put other frame (8) and other handle bracket over
axle bolt and fasten with 5/16 lock washer (17) and 5/16 hex nut (6).
4. Insert 5/16-18 x 1” bolt (13) through hole in bottom of right tool support (5). Now put spacer (9) and left tool support (4) over bolt and
fasten with 5/16 hex nut (6).
5. Put tool support assembly from #4 between frame ends (8) with spacer end down and curve toward wheel. Next fasten frame to tool
support assembly with ¼-20 x 2” bolt (11) and ¼-20 nut (12).
6.
N
OTE
:
Four holes in (4 & 5) are for adjustable height for easier operating. Now take wood handles (3) and attach to toll support sup-
ports (4 & 5) using 5/16-18 x 1½” bolt (7) and 5/16 hex nut (6).
7. Now install cross brace (1) to wooden handles using #14 x 1¼” screws (2).
A
SSEMBLY
OF
T
OOLS
(see above )
F
URROW
P
LOW
Place Furrow Plow in front of tool support slot. Put carriage bolt (21) through square hole and through slot in tool support. Next put
formed washer (19) over carriage bolt (21) and tool support: fasten with lock nut (18).
H
ILLING
P
LOW
Place Hilling Plow in position shown above. Follow instructions from above.
F
IVE
T
INE
Assemble Fine Tine as pictured above and fasten with two (13) and two (6) hex nuts. Next put carriage bolt (21) through rear of the as-
sembly and through tool support, fasten with formed washer (19) and lock nut (18).
HELPFUL HINTS:
R
EAD
DIRECTIONS
BEFORE
ASSEMBLY
AND
ENSURE
ALL
PARTS
ARE
ACCOUNTED
FOR
. I
F
STILL
HAVING
TROUBLE
ASSEMBLING
YOU
CAN
CALL
574-848-
7491
OR
800-294-0671
FOR
ASSISTANCE
.
Your High Wheel Cultivator is intended
for use in soil already plowed or tilled. It
is not designed as a ground breaking tool.
Pt. #52161
F
URROW
P
LOW
H
ILLING
P
LOW
5-T
INE
O
PTIONAL
S
LICING
H
OE
#60132
