Assembly and Operation Instructions
2050TP Manualupdate 08082022
PAGE 2
ASSEMBLY INSTRUCTIONS
Step 1:
Remove all components and hardware items from the box. Place the spreader hopper upside down and
facing away from yourself. (Frame is already installed)
Step 2:
Insert the cross brace through the gearbox braces(#9)
Step 3:
Ensure #28 wire brace is under #15 control support prior to attaching the #15 control support to #11 using
#17 bolts and #1 nuts.
Step 4:
When connecting the control handle make sure it is facing downward and connect to the holes from #15 to
#11 in the center. See the picture below for example:
Step 5:
Use #13 Brace Clip and #7 bolt and #16 nut to attach the bottom of the #28 wire brace to the lower side of
the control support.
3
9
28
11
&
17
3
