background image

WARRANTY CONTINUED ON NEXT PAGE

2

3

Earthquake Amplifiers are capable of generating high sound pressure 
levels. You should exercise caution when operating these amplifier 
systems. Long term exposures to high levels of sound pressure will cause 

permanent damage to your hearing.  Sound pressure levels exceeding 85dB can be 
dangerous with constant exposure. Set your audio system to a comfortable loudness 
level. Earthquake Sound Corporation does not assume liability  for damages resulting 
from the direct use of Earthquake amplifiers or other Earthquake products , and urges 
users to play their music at moderate listening levels.

 

CAUTION:

      3
      2
      1 -  1  1/2

          1
          1/2
          1/4    or  less

8
6
4

THE CHART (ON THE SIDE) SHOWS THE 
U.S.  GOVERNMENTS 

OCCUPATIONAL 

SAFETY  AND  HEALTH  ADMINISTRATION  
(OSHA) REGULATIONS  WHICH  WERE  IN  
EFFECT 

AT 

THE 

TIME 

OF 

THIS 

PUBLICATION FOR PERMISSIBLE  NOISE 
EXPOSURE, PER 29CFR1910.95,  TABLE G-
16.

DURATION IN HOURS

THANK YOU

Thank you for choosing Earthquake Sound’s  high-end line of PowerHouse amplifiers for 
superior enhancement of your mobile audio system. With proper installation and responsible 
listening, your amplifier(s) will give you years of near perfect sound reproduction. 

We strongly recommend you to have your new amplifier(s) installed by an authorized 
Earthquake Sound dealer: Installation professionals employed by your dealer have the 
correct tools and knowledge to install your amplifier(s) neatly and successfully. Also, when 
your new products are installed by an authorized dealer, your product will include a FIVE 
YEAR LIMITED WARRANTY (1-Year for Digital models excluding PH2000W/D1 and 
PH2000W/D1.1). If you choose to perform your own installation,  your warranty will be subject 
to limitations. Dealer policies on handling warranty requests may vary from one dealer to the 
next. Please read the warranty information in its entirety and use good judgment when 
making these vital decisions.

Table Of Contents

  97

100
102
105
110
115

90
92
95

SOUND LEVEL DBA

Specifications Are Subject To Change Without Notice

www.earthquakesound.com

Five (5) year limited warranty; PH800W/2, PH1000W/2, PH2200W/4, PH2000W/D and 
PH2000W/D1.1:

Earthquake warrants the original purchaser that all Factory Sealed New Audio Products 
be free from defects in material and workmanship, under normal and proper use, for a 
period of five (5) years from the date of purchase (as shown on the original bill of sale with 
serial number affixed/written on it). 

The five (5) year limited warranty period is valid 

only if the product was purchased from and properly installed by an authorized 
Earthquake Sound dealer/installer, and the warranty registration card is properly 
completed and mailed to Earthquake Sound Corporation.

!

Products that were purchased from non-authorized dealers are not covered by 
warranty.

!

If the product was not installed by an authorized dealer, then only a ninety (90) 
day warranty period applies.

!

Open box, B-stock and DEMO products have only thirty (30) day warranty from 
the date of purchase.

(A) Five (5) year limited warranty plan coverage guidelines: 

!

First year

: Earthquake pays for labor, parts, and ground freight (only in US mainland, 

not including Alaska and Hawaii) back to customer.

!

Second, third, fourth & fifth year:

 Earthquake pays labor only. Customer must pay for 

parts, re-packing (if needed)  and freight both ways.

!

Earthquake agrees to repair or replace - at our option - all such defective 
products/parts.

(B) Warning:

Products (sent in for repair) that are tested by Earthquake technicians and deemed to 
have no problem(s) will not be covered by the five (5) year limited warranty. Customer will 
be charged a minimum of one (1) hour of labor (ongoing rates) plus shipping and handling 
charges.

(C) Warranty Limitations: 

!

Defective products/parts have not been altered or repaired by other than an 
Earthquake factory approved technician.

!

Products/parts are not subjected to negligence, improper use, or accident, damaged 
by improper line voltage, used with incompatible products, or have its serial number or 
any part of it altered, defaced or removed, or have been used in any way that is contrary 
to Earthquake's written instructions. 

!

Damages to speaker cabinet and cabinet finish due to misuse, abuse, or use of 
improper use of cleaning materials/methods.

!

Bent speaker frame, broken speaker connectors, holes in speaker cone, surround & 
dust cap, burnt speaker voice coil.

!

Fading, deterioration of speaker components and finish due to improper exposure to 
elements.

!

Bent amplifier casing, damaged finish on the casing due to abuse, misuse, or improper 
use of cleaning material.

!

Burnt tracers on PCB. 

!

Product/part damaged due to poor packaging or abusive shipping conditions.

!

Subsequent damage to other products.  

 

WARRANTY

Cautions and Advisories

Warranty

Specifications

PH800W/2

PH1000W/2

PH2200W/4

PH2000W/D1

PH2000W/D1.1

PH5000W/D1

PH10000W/D1

Installation Example

Page 2

Page 3 - 4

Page 5

Page 6 - 7

Page 8 - 9

Page 10 - 11

Page 12 - 13

Page 12 - 13

Page 14 - 15

Page 16 - 18

Page 19

Summary of Contents for PH800W/2











Reviews: