EarthQuake MiniMe P10, User Manual

Page: 12 / 21

High Level Single Sub + Satellite
Setup
The MiniMe P10
V2
/P12
V2
has a high/speaker level
output connection that can be used to drive the stereo
front or rear speakers.
Using speaker wires (up to 16-gauge), simply
connect the receiver’s front speaker outputs to the
MiniMe P10
V2
/P12
V2
speaker level inputs. Then using
speaker wires, connect the MiniMe P10
V2
/P12
V2
speaker level outputs to the speakers.
Remember to always connect red-to-red and black-
to-black when making connections between a
receiver/processor to the subwoofer. You will notice a
lack of bass from your subwoofer if you inadvertently
reverse one of the connections (i.e. red-to-black).
In case the MiniMe P10
V2
/P12W
V2
becomes out of
phase with the main front speakers, adjust the phase
shift to correct the problem. Note that maximum bass
is only achieved when the sub is in phase with the
speakers in your system.
Connecting Your Subwoofer(s) cont’d
Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com
back of typical
processor/receiver
12 MiniMe Manual P10
V2
/P12
V2
SPEAKER OUTPUT
CENTER FRONT
L
-
L R L R R
SURROUND SUR. BACK
+
-
+
NOTE:
DO NOT USE HIGH LEVEL AND LOW
LEVEL INPUTS AT THE SAME TIME