EarthQuake MC33 Owner'S Manual Download Page 6

6

Owner’s Manual

MC33 2-CYCLE CULTIVATOR 

Get parts online at  

www.GetEarthquake.com 

or Call 

800-345-6007 

M-F 8-5 CST

• 

Test the fuel cap for proper installation before starting and 

using engine.  

• 

Always run the engine with fuel cap properly installed on 

the engine.

NOTICE

  THE RIGHT AND LEFT SIDES OF  YOUR  

  ROTOTILLER ARE DETERMINED FROM  

  THE OPERATING POSITION AS YOU  

  FACE THE DIRECTION OF FORWARD  

 TRAVEL.

THE 2-CYCLE ENGINE USES A 50:1 
RATIO OF GAS:OIL.
DO NOT USE STRAIGHT UNMIXED  
GASOLINE OR ENGINE DAMAGE WILL 
OCCUR.
THIS IS A MOTORIZED CULTIVATOR THAT WORKS THE 

SOIL BY MEANS OF ROTATING TINES.  IT IS PEDESTRIAN 
CONTROLLED, BUT NOT SELF-PROPELLED, AND USES 
A GASOLINE-FUELED INTERNAL COMBUSTION ENGINE 
TO POWER THE TINES.  IT SHALL NOT BE USED FOR ANY 
OTHER PURPOSE.

OPERATION

• 

Do not allow hands, feet, or other body parts, or clothing 

near the rotating tines or any other moving part. The tines 

begin to rotate once the engine/motor is started and the 

activating device is engaged. The tines may momentarily 

rotate after the activating device is released. 

• 

Exercise extreme caution when crossing gravel surfaces. 

Stay alert for hidden hazards or traffic. 

• 

If an object becomes lodged in the tines, flip the ON/OFF 

switch to the OFF position, allow to cool before attempt-

ing to remove the foreign object.

• 

After striking a foreign object, stop the engine (motor), re-

move the wire from the spark plug (or disconnect the cord 

for electric products), thoroughly inspect the machine for 

any damage, and repair the damage before restarting and 

operating the machine. 

• 

Exercise caution to avoid slipping or falling. 

• 

If the machine should start to vibrate abnormally, stop 

the engine (motor) and check immediately for the cause. 

Vibration is generally a warning sign of trouble. 

• 

Stop the engine (motor) when leaving the operating po-

sition, before unclogging the tines, and when making any 

repairs, adjustments and inspections. 

• 

Stop the engine (motor) when leaving the machine unat-

tended. 

• 

Before cleaning, repairing or inspecting, shut off the 

engine and make certain all moving parts have stopped. 

Disconnect the spark plug wire, and keep the wire away 

from the plug to prevent accidental starting. Disconnect 

the cord on electric motors. 

• 

Never operate tiller without guards, covers, and hoods in 

place.

• 

Do not overload the machine capacity by attempting to 

till or cultivate too deep at too fast a rate. 

• 

Never operate the machine at high transport speeds on 

hard or slippery surfaces. 

• 

Never allow bystanders near the machine, especially small 

children. 

• 

Use only attachments and accessories approved by the 

manufacturer of the machine (such as wheel weights, 

counterweights, and the like). 

• 

Never operate the tiller without good visibility or light. 

• 

Be careful when tilling in hard ground. The tines may catch 

in the ground and propel the tiller forward. If this occurs, 

let go of the handlebars and do not restrain the machine. 

• 

Use extreme caution when reversing or pulling the 

machine towards you. To avoid getting pinned against a 

structure, ensure adequate distance before reversing near 

a wall or fence. 

• 

Do not change the engine governor settings or over 

speed the engine. 

• 

Start the engine or switch on the motor carefully accord-

ing to instructions and with feet away from the tines. 

• 

Never pick up or carry a machine while the engine (motor) 

is running. 

• 

Do not operate the tiller while under the influence of 

alcohol or drugs. 

• 

Powered walk-behind tiller work is strenuous. You must be 

in good physical condition and mentally alert. If you have 

any condition that might be aggravated by strenuous 

work, check with your doctor before operating a powered 

LEFT

RIGHT

Summary of Contents for MC33

























Reviews: