What Makes A Kompressor?
Class "A/B" Amp
* 200 watts class "AB" , high efficiency
power amplifier.
* 24 dB / Octave variable filter from 40
Hz to 160 Hz.
* Automatic signal detection circuitry,
When "ON", it automatically turn on the
subwoofer when an audio signal is
detected. It also shuts the subwoofer off
after 30 minutes if no signal is detected.
* High level (speaker) audio inputs.
* Low level (RCA) audio inputs.
* Full range speaker outputs that can be
used to power up other full range
speakers in the system.
-7-
Every component of the XLT driver is designed
for accurate reproduction of bass and sub-bass
frequencies. With a massive moving structure,
the XLT operates with extremely low distortion
and impressive transient response. Its
performance is attributed to a non-conventional
motor structure design, that integrates
components such as:
* Thick, high-gauss magnets, with a
total height of 1.2 inches.
* Over 7 inch (D), epoxy coated super
spider. Chill-plated for long lasting linear
performance.
* 2.5" diameter, high temperature voice
coil, with 1,85" copper winding (height).
* 1.5" thick, single layer, thermally
pressed poly-ether foam surround.
The XLT structure allows for extreme
excursions (19 to 21mm) without physical
deformation or running out of Reactive
Electromagnetic Coupling.
XLT Drivers
Summary of Contents for Kompressor S-10
Page 4: ...Kompressor Performance ...
