5
www.earthquakesound.com
1
2
1. Master Power Switch:
Turns the current to the amplifier ON or OFF manually. When turning
on the amplifier via a 12VDC source the switch must be in the OFF
position.
Additionally when adding or removing 12VDC connections or any
other connections the main power circuit breaker needs to be in the
off position. This will help prevent any surges that could damage your
products or cause bodily injury.
2
.
Peak LED Indicators:
The Cinénova 7300 is equipped with seven LED indicators on the
front panel that should remain unlit. These LEDs indicate the oper-
ating status of each corresponding channel. If an LED or all LEDs
remain lit continuously, the amplifier is clipping that channel and the
volume should be turned down immediately to prevent damage. It is
ok for the LED to flicker but it should never remain on continuously.
Cinénova 7300 Front Panel Overview
