manualshive.com logo in svg

EarthQuake 9050300, Operator'S Manual

Share
Download
EarthQuake 9050300 Operator'S Manual Download Page 40

CHIPPER/SHREDDERS

1-yeAR lIMITeD WARRANTy

Terms and Conditions

Ardisam, Inc., a manufacturing company, warrants this eARTHQUAKe® CHIPPeR/SHReDDeR to be free from defects in the 

material or workmanship for a period of one year from the date of purchase.  During the one year warranty of this product, 

Ardisam will furnish, at its discretion, parts and labor to correct any defect caused by faulty material or workmanship. Any unit 

used in a commercial application is covered for a period of 90 days after purchase.

If warranty work needs to be done, contact your place of purchase or Ardisam, Inc. for an authorized service center in your area. 

Ardisam will make the necessary repairs if a service center is not available. To obtain warranty service and/or replacement 

instructions, you must have prior approval from Ardisam before shipping your package to us by calling our customer 

service department at 1-800-345-6007 Monday through Friday from 8 a.m. to 5 p.m. for a return material authorization 

number (RMA#). All items must be shipped prepaid. Ardisam, Inc. will at no charge, repair or replace, at their discretion, any 

defective part which falls under the conditions stated above.

Ardisam retains the right to change models, specifications and price without notice. This product if used as intended, will give 

you years of trouble free service. We hope you will enjoy the quality of our products for years to come. 

For replacement parts, phone 1-800-345-6007 or go online to www.getearthquake.com.

This warranty applies to the original owner with a proof of purchase and is not transferable. It supersedes all other warranties either 

expressed or implied and all other obligations to liabilities on our part.  Ardisam, Inc. does not assume, and does not authorize any 

other person to assume for us, any liability in connection with the sale of our products.

The warranty applies only to products which have not been subjected to negligent use, misuse, alteration, accident or repairs made 

by anyone not certified by Ardisam, Inc. This guarantee is void unless the warranty card is properly filled out and received by Ardisam, 

Inc., within 30 days of purchase or go to www.GetEarthquake.com for online registration.

EARTHQUAKE

A Division of Ardisam, Inc.

1160 Eighth Avenue; P.O. Box 666

Cumberland, Wisconsin 54829

1-800-345-6007 · Fax (715) 822-4180

E-mail:  [email protected]

Summary of Contents for 9050300













































Reviews:

No comments

Brands by name

Popular brands

Load more brands