10
ARDISAM
UNPACKING AND ASSEMBLY
INSTALL THE DEPTH REGULATOR
LEVER
1. Install the depth regulator lever into the top of the
depth regulator bracket with handle facing rearward.
2. Insert detent pin through depth regulator bracket and
top hole of depth regulator lever--tines should clear
the ground.
NOTE: The rototiller is now in the transport position.
FILL ENGINE CRANKCASE
1. Add oil according to engine manual.
Do not overfill.
Use a clean, high quality detergent oil. Container
must be marked A.P.I. Service SF - SJ. Use no
special additives with recommended oils.
Do not
mix oil with gasoline.
Oil level must be full. Check
the oil level by removing oil fill plug. Oil level should
be up to the bottom of the fill plug opening.
2. Always check oil level before starting engine. Refer
to engine manual for capacity and type of oil to use.
depth regulator
bracket
depth regulator lever
detent pin
Engine is shipped from factory without oil. You
must add engine oil before starting engine.
Do not add engine oil into gear case dipstick hole.
CAUTION
dipstick
gear case
dipstick hole
NO ENGINE OIL!
