19
Maximum power voltage (W)
≤ 700W
Optimum operating voltage (Vmp)
≤ DC32V
Optimum operating voltage (Vmp)
≤ DC20V
Open-circuit voltage (voc)
≤ DC42V
Short-circuit current (Isc)
≤ DC25A
Maximum power current
≤ DC20A
Caution
One individual module may generate DC
voltages greater than 30 volts when
exposed to direct sunlight. Contact with a
DC voltage of 30V or more is potentially
hazardous. Electrical joints such as the
wire terminal will cause sparks, burning or
deadly electric shock. Please do not touch
such terminals directly under any
circumstances. (Figure 33)
Caution
When disconnecting wires from a
photovoltaic module that is
exposed to sunlight, an electric arc
may result. Such arcs may cause
burns, combustion and may
otherwise create problems.
Therefore, be extremely careful!
Photovoltaic solar modules convert
light energy to direct-current
electrical energy. They are
designed for outdoor use. Modules
may be ground mounted, mounted
on rooftops, vehicles, or boats.
Proper design of support structures
is the responsibility of the system
designer and installer. Proper use
of mounting holes is suggested in a
following paragraph.
Do not attempt to disassemble the
module, and do not remove any
attached nameplates or
components.
Do not apply paint or adhesive to
Figure 33
Figure 34
Figure 35
Summary of Contents for ENE ACDC12
Page 30: ...28 Wiring the Combiner Box...
