Your Sedona table comes completely assembled and ready to use.
Once the table is unpacked, follow the “Moving Your Table” instructi ons below.
Moving Your Table
Lift your table by grasping fi rmly from the bott om of the frame underneath the
upholstered top. Do not try to lift from the upholstered top.
Always use cauti on when moving your table - always use proper safety
procedures/equipment.
Leveling Your Table
Leveling, or balancing, your table is very important during initi al setup and routi ne maintenance.
Your table is equipped with leveling feet that can adjust to uneven fl oors.
To adjust the leveler feet:
1. Place the table in the positi on you plan to use it.
2. To determine which foot needs adjusti ng, att empt to “rock” your table. If there is any
movement, the leg that is lift ing is the one that will need adjusti ng.
3. Raise table height approximately 6 inches.
4. Using your hand, or a wrench if necessary, turn the leveling foot in the needed directi on.
(Counterclockwise will lower the overall height, clockwise will raise the overall height)
Table Accessories
All Sedona tables come with outlets at both ends, specifi cally designed for providing a fi xed
locati on for FacePillow platf orms, salon pillows, and other accessories.
See the Earthlite website for all available accessories that
will fi t into the table outlets.
SECTION 3: INSTALLATION
6
Weight & Lift Capacities
The Sedona maximum weight capacity is 800 lbs.
800 lbs.
The back secti on and leg secti on has a maximum weight capacity
of 50 lbs. These secti ons are not meant to hold full body weight.
50 lbs.