On/Off Button:
•
Press & hold for 2 seconds to power on or off
•
Press to review parameters or real-time status
Select/Lock Button:
•
Press to select set-up time or temperature
•
Press & hold 2 seconds for Lock or Open mode
•
Set-up time 1-99 minutes
•
Set-up temperature 86-
122
0
F
Detaching Digital Controller
Operations & Controls
(+) Increase Button:
Increase value
(
-
) Decrease Button:
Decrease value
Easily remove detachable controller by lifting tab
(shown below) and pulling apart.
Troubleshooting
My table warmer doesn’t heat up
To quickly test the warmer just roll it up, set the controller to ‘high’ temperature setting, let it heat for a few
minutes, but not more than 10. Then test the heat level by inserting your hand or arm in the center of the
warmer. Please remember that the temperatures are set for extended contact with sensitive human skin. The
fleece on the pad often ‘hides’ the heat from the casual touch, especially on the low and medium settings.
My table warmer stopped working
Make sure that the power outlet on the wall is working. Then double check the warmer as described above. If
no heat is present, the wires in your warmer may have become kinked or a power surge may have tripped the
overheat safety circuit in your warmer. This essential element protects the product from burning a client and/or
causing a fire. We offer warranty to cover this possibility.
My table warmer is not hot at the highest setting
Please remember that the temperature levels are set for extended contact with sensitive human skin. The heat
will dissipate too quickly to notice without someone lying on the warmer. While desired temperature varies
from person to person, we believe that the high temperature provides a warm environment for a wide number
of clients while at the same time, providing a safety factor to prevent potential burns.
How can I test that my table warmer works properly?
To quickly test the warmer just follow the instructions above and roll it up or you can also lie on top of the
warmer for 5 minutes.