The following images and explanations will guide you through each step of your chair setup
Unzip the carry case and remove the
chair and additional cushions.
Lay the Avila down so that the armrest and
seat face upward.
Loosen the front locking lever. which will free
the front legs and center post. Make sure the
lever is positioned properly or it will not loosen.
1
2
3
Lift the chair slightly and bring the front legs
forward until the support cables are taut.
Raise the center post to the desired location.
Tighten the front locking lever.
4
5
6
Toward the front of the chair, locate the small
T-handle in the center of the armrest.
Pull the T-handle, which will unlock the
armrest.
Lift the armrest to its utmost position.
Releasing the T-handle will lock it in place.
7
8
9
Locate the hand lever on the facecradle
platform and pull outward. This will free the
platform.
Adjust the facecradle platform to the desired
location and lock down the hand lever.
Locate the seat at the back of the chair.
10
11
12
