Wide pedal using
A Dummy Boot & an ISO Boot for
isolation.
OR
Wide pedal using
A Dummy Boot & an ISO Boot for
isolation.
For battery power, 1 or 2 Battery Tethers plug
into the Battery Port(s). 2 Battery Tethers are used with the
Power Pack XL,
available when purchasing your EARTHBOARD
or via our accessory option. The Power Pack XL provides higher
power capacity to the EARTHBOARD.
OR
Plug in an AC Adapter to either Power Port on the right side. Power
can also be used to power a floor pedal (as shown) or to connect
power to another EARTHBOARD.
Each effects pedal sits on a
Gravity Boot.
The Gravity boot has magnetic feet and attaches to the steel rails of the EBII-SR.
(Ensure the
RED
feet are on the rail with the
red dot
on the left.) The
Gravity Boot Tether
is the cable that connects
the Gravity Boot to the pedal for power. For wide pedals that need more support, you can use a
Dummy Boot.
The
Dummy
Boot
is exactly like a Gravity Boot, except it has no power circuit. If you have an extra Gravity Boot, you can use that as well.
These are available for purchase as an accessory.
Typical EBII setup
Use your
LifeLine
to power a floor
Pedal. Note: You
can also power
another board
with this
method!
Cross Board Audio Patch Cable jacks on each side to interconnect top and bottom rows.
