Wide pedal using
A Dummy Boot & an ISO Boot for
isolation.
Typical setup for the EBII-SR
(Note, battery and adapter would not be plugged in at the same time.)
For battery power, 1 or 2 Battery Tethers plug
into the Battery Port(s). 2 Battery Tethers are used with the
Power Pack XL,
available when purchasing your EARTHBOARD
or via our accessory option. The Power Pack XL provides higher
power capacity to the EARTHBOARD.
OR
Plug in an AC Adapter to either Power Port on the right side. Power
can also be used to power a floor pedal (as shown) or to connect
power to another EARTHBOARD.
Each effects pedal sits on a
Gravity Boot.
The Gravity boot has magnetic feet
and attach to the steel rails of the EBII-SR. (Ensure the
RED
feet are on the rail
with the
red dot
on the left.) The
Gravity Boot Tether
is the cable that connects
the Gravity Boot to the pedal for power.
For wide pedals that need more support, you can use a
Dummy Boot.
The
Dummy
Boot
is exactly like a Gravity Boot, except it has no power circuit. If you have an extra
Gravity Boot, you can use that as well. These are available for purchase as an
accessory.
The 2 Power Ports on the right side have 3 possible functions:
1. Plug in an AC adapter when not using a battery.
2. Use our LifeLine cable (supplied) to power a floor pedal.
3. Use our LifeLine cable to connect to another EARTHBOARD.
NEED PATCH CABLES?
WE HAVE THEM FOR YOU!
We have high quality molded cables with 90-
degree ¼”
Jacks. A superb value compared to other retailers.
Use code
‘freebie10’ get 10% off your first 4
-pack.
We have
4”,6”, and 8” cables
available.
OR
TO PEDAL
