The Master CLIP must be turned “ON”
to link all Remote CLIP.
Charging / Built-In Battery
1. Remove Neoprene Cover.
2. Insert CLIP into Multi-Charger.
3. Corresponding LED indicator:
RED=Charging,
GREEN=Full Charge
4. Run time - 4 hours.
Operation
1) Identify the MASTER and power it ON.
2) Turn all REMOTE Clips ON.
3) Plug in lightweight headsets (if included).
4) Set listening volume level as desired.
Signal Strength Indicator
The CLIP provides hands free full duplex communication up to ¼ mile. A
continuous beep indicates loss of signal / operating range has been exceeded.
The Cyber Headset
with lightweight back band
Microphone Mute Button
Volume up/down
Power button (center)
Multi-Port charger
Microphone Placement
For optimum performance place directly in front of,
and appx. 1/4 “ from mouth.
IN – Mic is Live, Transmit
OUT – Mic gain is paused
Back Band worn behind
& below hairline
