29
A
Appendix:
Manufacturer
declaration
This appendix describes the system’s
compliance with applicable IEC and RF standards.
A.1
Overview
See the following tables for specific information regarding the system’s compliance with the IEC
60601-1-2 standards.
The EarlySense InSight System is intended for use in the electromagnetic environment specified
below. The customer or the user of the EarlySense InSight should ensure that it is used in such an
environment.
Table 9: System Compliance Information
–
Electromagnetic Emissions
The EarlySense InSight System is intended for use in the electromagnetic environment
specified below. The customer or the user of the EarlySense System should ensure that it is
used in such an environment.
Emissions Test
Compliance
Electromagnetic Environment
–
Guidance
RF emissions CISPR 11
Group 1
The EarlySense InSight System uses RF energy
only for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF emissions CISPR 11
Class B
The EarlySense InSight System is suitable for use
in all establishments, including domestic
establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.
Harmonic emissions IEC
61000-3-2
Complies
Voltage
fluctuations/flicker
emissions IEC 61000-3-3
Complies
Summary of Contents for InSight AME-01350-US
