5
6
7
8
We appreciate your purchase of the 5-Section Coat Locker
with Bench. Early Childhood Resources has made every
effort to supply a quality product, that with proper use and care,
will bring you many years of trouble free use!
Clean wood with a damp cloth or sponge using warm water and
mild soap. Wipe dry.
Do not place near heat, moisture or vaporizer which may cause
wood to warp and peel.
Check for loose or worn parts periodically and tighten or
replace as necessary.
Care and Cleaning
“Early Childhood Resources® guarantees the quality
of all of our products. You can trust the quality and
safety of our furniture and materials, along with the
peace of mind that our products are made to last. If
for any reason, you are not satisfied with the quality
and workmanship of our products, we will replace the
item or refund the sale.”
J Q
C
E
D
I
F
F
F
B
J
Q
F
Attach the Top Shelf
5A. Insert 8 Metal
Dowels(J) into the plastic
plugs located underneath
Top Shelf(B). Tighten with
a Phillips Screwdriver.
5B. Insert 2 Cams(Q) into
the large holes in each of
the 4 Upper Dividers(F).
Make sure the arrow on the
Cams(Q) point toward the
holes in the closest edge.
5C. Position Top Shelf(B)
so the attached Metal
Dowels(J) enter the holes
in top edges of the Upper
Dividers (F). Turn Cams(Q)
with Phillips Screwdriver
until locked onto the Metal
Dowels(J).
Attach the Side Panels
K
Ｘ８
C
E
D
I
F
F
F
B
F
A1
6A. Attach the Left Side Panel(A1) to the assembled unit as shown,
using 8 Round Hex Head Screws(K). Tighten using the Hex Key
Tool(M).
C
E
I
F
F
F
B
F
A2
A1
D
K
Ｘ８
K
K
6B. Attach the Right Side Panel(A2) to the
assembled unit as shown, using 8 Round
Hex Head Screws(K). Tighten using the
Hex Key Tool(M).
!
CAUTION:
- Do not allow children to climb or stand on shelves.
- Do not use as a stepladder.
Attach the Coat Hooks
7A. Attach 8 Hooks(N) to the 4 Upper Dividers(K) using 8 Posts(O)
and 8 Post Screws(P). Tighten with a Phillips Head Screwdriver.
7B. Attach 8 Hooks(N) to the Side Panels (A1,A2) using 4 Posts(O)
and 4 Post Screws(P). Tighten with a Phillips Head Screwdriver.
You are done!
A1
F
F
F
F
A2
N
Ｘ１０
O
Ｘ１２
P
Ｘ１２
Version: ELR-0634.D.2010.01.02
Purchase Order Number:
Record the Purchase Order Number here. Information is
located on a label enclosed, and on the shipping carton.
Place label and this sheet in an accessible place.
Model Number:
ELR-0634
