IMPORTANT:
It is recommended that the power cable and/or extension cable are fully
unwound before a connection is made to the power
supply. However, ensure the residual cable does not pose a trip hazard.
The motor operates but cleaner fails to pick up?
Check if the cleaner requires emptying.
Check and clear any blockages within the system.
Check that filters are clean and not damaged.
The motor makes a high pitched noise?
Check if the cleaner needs emptying and the float valve has
operated.
MAINS CONNECTION
This product is supplied with a specially prepared mains lead, if the cord is damaged, it
must be replaced by the manufacturer, its service agent or similar qualified persons in
order to avoid a hazard.
NOTE:
When used outside, the cleaner must be connected to an RCD protected
electrical supply to conform to BS7671:1992.
Please read the following safety instructions before use.
1. If the moulded plug is cut off from the mains lead then the plug must be disposed of
safely. NEVER under any circumstances insert such a plug into a 13 amp socket.
2. NEVER under any circumstances use the appliance or mains lead without the fuse
cover fitted. This is the little cover fixed into the base of the plug to hold the fuse in
place.
3. If you lose the fuse cover then please contact our helpline on 01483 454666.
4. A replacement fuse must be rated at 13 amp. These must be manufactured and
approved to BS1362.
IF IN ANY DOUBT PLEASE CONSULT AN ELECTRICIAN.
EC DECLARATION OF CONFORMITY
We declare that the unit WDS30P conforms to: 2006/95/EC,
EN60335-1 & 2-2-1995 & 2004/108/EC, EN55014.
Tim Hopper - Technicacl Director
© Earlex Limited 2009
WD0370 02/09
8
Earlex Limited, Opus Park, Slyfield Industrial Estate
Moorfield Road, Guildford, Surrey, GU1 1SZ
www.earlex.co.uk
WD0370 0908:Layout 2
2/3/09
13:35
Page 8
