You will need to check the spray
nozzles, piston and spring from
time to time to check for wear and
replace if necessary.
NEVER DISPOSE OF PAINTS OR
SOLVENTS INTO DRAINS.
CONTACT YOUR LOCAL
COUNCIL TO ARRANGE
COLLECTION.
11
MAINS CONNECTION
WARNING - THIS APPLIANCE MUST BE EARTHED
Your unit will have been supplied with a mains lead with a fitted moulded plug. This
is identified by the fuse holder in the base of the plug. Please read the following
safety instructions before use.
1 If the moulded plug is cut off from the mains lead then the plug must be disposed
of safely.
NEVER
under any circumstances insert such a plug into a 13 amp socket.
2
NEVER
under any circumstances use the appliance without the fuse cover fitted.
This is the little cover fixed into the base of the plug to hold the fuse in place.
3 If you lose the fuse cover then please contact any electrical dealer for a
replacement or ring our helpline.
4 A replacement fuse must be rated at 5amp. The fuse must be manufactured and
approved to BS1362.
5 IF IN ANY DOUBT PLEASE CONSULT AN ELECTRICIAN.
If you need to fit a plug to the mains lead, this should be done in accordance with
the wiring instructions on the mains lead, and will need to be fitted with a 5 amp
fuse. If in doubt please consult an electrician.
WARNING-
If you are using an extension lead, it must
be rated at a minimum of 6 amps and fully unwound.
Do not operate with a lead rated at less than 6 amps
as this will cause premature failure of the motor and
will void your guarantee.
sg82 amend p8.qxd 19/01/00 12:35 Page 11
