TROUBLESHOOTING
PROBLEM
CAUSE
ACTION REQUIRED
Little or no spray Air inlet blocked
Check the condition of the Air Filter (1)
and clean or replace
Check air inlets, air vents and air hose for
blockages
Turbine has no
power
No power at supply
Check the power supply
Cable fuse has blown
Where applicable check fuse and replace
if necessary
Circuit Breaker (3) has tripped
Reset the Circuit Breaker (3)
Incorrect or damaged power cord
set used
Use correct power cord set. Replace if
necessary
Worn turbine brushes
Replace brushes at an authorized
service centre
8
Summary of Contents for SprayPort Professional 6000 Series
Page 10: ...NOTES 10...
Page 11: ...11 NOTES...
