Earlex SprayPort HV6002, Operating Instructions Manual

Page: 3 / 12

3
INTRODUCTION
This powerful spray system applies coatings faster than brushing or rolling while maintaining a smooth
and accurate finish.
The SprayPort
®
series is designed for the professional decorator and finisher. The latest technology and
materials combine to deliver a consistently high performance.
The SprayPort
® series is simple to set up using quick-connect fittings.
The paint spraying system consists of a motor-operated turbine, which provides the spray gun with
atomization air for a precise finish.
The powerful steel turbine incorporates open cell air filters for a continuous and clean air flow.
Air is fed to the gun through the lightweight HyperFlex™ hose.
The HV6000 series sprays a wide range of paint with or without dilution.
To achieve the desired results only use good quality paint or coating. Keep in mind that low
temperatures make paint or coating thicker. Therefore use of the Spray Gun is not recommended below
a minimum temperature of 60°F.
TECHNICAL SPECIFICATION
6002 6003
Turbine 2 stage 3 stage
Motor type Tangential Tangential
Voltage 120V 120V
Frequency 60Hz 60Hz
Current 9.6A 10A
Air filters Dual removable filters Dual removable filters
Pressure rating psi 4.5 (0.31 bar) psi 5.5 (0.38 bar)
Air flow 90 CFM (2550 l/min) 90 CFM (2550 l/min)
Air Hose 25ft (7.6m) vulcanised polymer 25ft (7.6m) vulcanised polymer