Earlex HG2000, Safety & Operating Instructions Manual

Page: 4 / 12

5.2 ELECTRICAL SAFETY
 Power tool plugs must match the mains supply socket-outlet. Never modify the plug in any
>> way.
 Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
 Do not use on materials of or containing asbestos.
 DO NOT exPOSe POweR TOOLS TO RAIN OR weT CONDITIONS .
 Do not abuse the power cord. Never use the power cord for carrying, pulling or unplugging
>> the power tool. Keep power cord away from heat, oil, sharp edges or moving parts.
 when operating a power tool outdoors, use an extension cord suitable for outdoor use, i.e.
>> type Sxw where x is any combination of J,e,O or T. extension cord rating for this heat gun
>> shall be 13A (1625w) maximum at 125V maximum.
>> If under 50ft length, 16 AwG minimum size is required.
>> If over 50ft length, 14 AwG minimum size is required.
 If this heat gun is used outdoors, an approved 125V 15A rated ALCI (Appliance Leakage
>> Current Interrupter) 6mA trip protected circuit must be used for added protection against
>> electric shock.
5.3 PERSONAL SAFETY
 Stay alert, follow directions stated in the instruction manual and use common sense when
>> operating a power tool.
 Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
 Use safety equipment. It is recommended to wear eye protection. we recommend wearing
>> a pair of heavy grade non-pvc type work gloves for protection against burns.
 Avoid accidental starting by ensuring the switch is in the off “0” position before plugging in.
 Do not overreach. Keep proper footing and balance at all times.
 Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
 If heat gun or power cord is damaged upon receipt, DO NOT USe. Return to point of
purchase.
5.4 HEAT GUN USE AND CARE
 Do not use the heat gun if the switch does not turn on and off. Any power tool that
cannot be controlled with the switch is dangerous AND SHOULD NOT Be USeD.
 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and other conditions that may affect operation of the power tool. If damaged, DO
>> NOT USe.
 Use the heat gun and accessories in accordance with these instructions and in the manner
>> intended for the particular type of power tool, taking into account the working conditions
>> and the work to be performed.
4