IF YOU REQUIRE FURTHER ASSISTANCE PLEASE CONTACT OUR
HELPLINE NO.
01483 454666
Monday -Friday 08:30 -17:00 (Excluding Bank Holidays)
4
MAINS CONNECTION
Your unit has been supplied with a mains lead with a fitted moulded plug. This is identified by
the fuse holder in the base of the plug. Please read the following safety instructions before
use.
If the moulded plug is cut off from the mains lead then the plug must be disposed of safely.
NEVER
under any circumstances insert such a plug into a 13 amp socket.
NEVER
under any circumstances use the appliance without the fuse cover fitted. This is the
little cover fixed into the base of the plug to hold the fuse in place.
If you lose the fuse cover then please contact any electrical dealer for a replacement or ring
our helpline.
A replacement fuse must be rated at 13amp. The fuse must be manufactured and approved
to BS1362.
IF IN ANY DOUBT PLEASE CONTACT AN ELECTRICIAN.
If you need to fit a plug to the mains lead, this should be fitted in accordance with the wiring
instructions as shown below, and will need to be used with a 13 amp fuse. If in doubt consult
an electrician. If the mains lead becomes damaged it should be replaced with our Pt No G32.
If you are using an extension lead it must be rated at a minimum of 10 amps and fully
unwound. Do not operate with a lead rated at less than 10 amps as this will cause premature
failure of the element which is not covered by guarantee.
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
1
2
3
4
5
GUARANTEE
This heat gun is guaranteed for a period of 2 years against faulty manufacture or
materials. It is not guaranteed for industrial or hire purposes. The nozzles are
classed as consumables and are not covered by guarantee. This guarantee does
not affect your statutory rights. In the event of any problem occurring please
contact us on our Helpline no.
01483 - 454666
Monday-Friday 08:30 -17:00 (Excluding Bank Holidays)
EC Declaration of Conformity
We declare that the unit: HG1500 conforms to: 73/23/EEC
EN60335-1, EN60335-2-45 & 89/336/EEC EN61000-3-2,
EN61000-3-3 & EN55014
Tim Hopper - Technical Director
Earlex Ltd.,
Moorfield Road, Slyfield Industrial Estate,
Guildford, Surrey. GU1 1RU. ENGLAND.
Tel: +44(01) 01483 - 454666. Fax: +44(01) 01483 - 454548.
email:[email protected]
www.earlex.co.uk
G29 04/01
®
Summary of Contents for HEAT GUN HG 1500
Page 6: ...6...
