EN
19
Initial Start-up
Check Content
1.
Remove the device and other items from the transport case.
2.
Check if the delivery is complete (see chapter Scope of Delivery).
3.
Check the device and the parts for damage. Do not put a damaged device
into operation and contact the manufacturer using the contact provided at
the end of this manual.
Before Usage
Fully charge the device's built-in battery before using it.
To reach the specified capacity of the battery, charge the battery at room
temperature.
Always charge the Ni-MH battery completely so that no capacity loss occurs.
Avoid intermediate charges. Leave the device connected to the power
source only until the battery is fully charged.
All device functions are deactivated for the duration of the charging process!
For charging, use the included charging cable
❸
:
1.
Completely unwind the charging cable
❸
.
2.
Insert the end of the cable with the USB-C plug
into the charging socket
ᒏ
on the device
.
3.
Plug the other end of the charging cable
❸
(USB-A plug) into a USB power adapter (not
included!)
4.
Plug the AC adapter into a suitable power
outlet.
During charging, the ON/OFF button
ಗ
pulses
purple.
Once the battery is fully charged, the ON/OFF button
ಗ
is permanently
purple until the connection to the power source is disconnected.
Full charging takes about 7 hours.
5.
Disconnect the device (and, if applicable, the power supply) from the power
source after charging.