EAntenna 17800.06-4, Manual

Page: 4 / 17

BOOM
BOOM
A A
Para montar el BOOM , tiene que hacer coincidir frontalmente las partes de boom que tienen la misma letra ( p.ej: A-A, B-B, C-C etc), y una
vez hecho, las placas (EA010039) se van fijando con los tornillos DIN 933 M6X16 y arandela DIN 9021 M6 . Se recomienda poner todas los
tornillos y arandelas antes de fijarla a tope para no dañar ninguna rosca del BOOM.
(EA010039)
(EA010039)
(EA010039)
DIN 933 M6X16
DIN 9021 M6
ESPAÑOL
BOOM
BOOM
A A
(EA010039)
(EA010039)
(EA010039)
DIN 933 M6X16
DIN 9021 M6
ENGLISH
To assemble the BOOM , you have to match frontally boom parts with the same letter (eg: AA, BB, CC etc), and once done, the boom clamps
(EA010039) go with fixing screws DIN 933 M6X16 and washer DIN 9021 M6 . It is recommended to put all of the screws with washers in first,
with all in then start with tightening the screws. This avoid damaging the threads in the Boom.