background image

3J01-INS-LAB-RevB13 • Traveler HTC User Manual

CONTENTS

1  INTRODUCTION.........................................................................3

2  IMPORTANT SAFETY PRECAUTIONS ........................................5

3  GETTING STARTED ...................................................................8

4  HANDLING TIPS ........................................................................9

5  ASSEMBLY..............................................................................13

6  ADJUSTMENTS .......................................................................17

7  MAINTENANCE .......................................................................23

8  TROUBLESHOOTING ...............................................................28

9  LIMITED WARRANTY ..............................................................29

10  INDEX .....................................................................................31

GF Health Products, Inc. is not responsible for typographical errors. 
All illustrations, specifications, packaging and warranties contained 
in this catalog are based on the latest product information available at 
the time of printing. The most current product information, including 
the most current revision of this manual, can be found online at 
www.grahamfield.com. 

Graham-Field

Everest & Jennings

E&J

, and 

Traveler

 are registered trademarks of GF Health Products, Inc.

Summary of Contents for Traveler HTC

































Reviews: