eamlab Musica C101, User Manual

Page: 10 / 25

10
problem Possible cause remedy
No power on
The plug on the power
cord is not connected
or is not fully inserted .
The mains fuse is
blown
Securely connect the
plug or check the fuse
on the rear panel next
to the socket
No sound
Connecting signal
Input or output cables
incorrect Check the RCA or XLR
cables and / or the
correct connection
sequence of sources
Distorted sound The source has an
output signal too high
and preamplifier input
is saturated Turn down the volume
of the source if it is
equipped with such
control
The signal is low
Switch XLR / RCA on
power amplifier check the correct
position of the switch
for connecting
balanced XLR or
unbalanced RCA
Main fuse is blow
Current overload replace with identical
fuse. if the fuse blows
again contact service
center
Remote control do
not work
Batteries , objects in
front of receiver replace batteries or
remove any obstacles
in front of the infrared
receiver
Troubleshooting