User’s guide
Eagletone MULTI DERBY
User’s guide
Eagletone MULTI DERBY
2
3
TABLE OF CONTENTS
1. Safety instructions
2. Technical specifications
3. Installation
4. How to set the unit
5. How to control the fixture
6. DMX512 configuration
7. DMX512 connections
8. Trouble shooting
9. Fixture cleaning
1. SAFETY INSTRUCTIONS
Please keep this user manual for
future reference. If you sell the
fixture to another user, be sure
that they also receive this instruc-
tion booklet.
ì
Unpack and check carefully that there
is no transportation damage before
using the fixture.
ì
Before operating, ensure that the
voltage and frequency of power supply
match the power requirements of the
fixture.
ì
It is important to ground the yellow/
green conductor to earth in order to
avoid electric shock.
ì
Disconnect mains power before servi-
cing and maintenance.
ì
Use a safety chain when attaching this
fixture. Do not handle the fixture by its
head only, always hold it by its base.
ì
Maximum ambient temperature is 40°C.
Do not use this fixture in places where
the temperature is higher than this.
ì
In the event of a serious operating
problem, stop using the fixture imme-
diately. Never try to repair the fixture
by yourself. Repairs carried out by
unskilled people can lead to damage or
malfunction. Please contact the nearest
authorized technical assistance center.
Always use spare parts of the same type.
ì
Do not connect the device to any
dimmer pack.
ì
Do not touch any wire during operation
as there might be a hazard of electric
shock.
ì
To prevent or reduce the risk of elec-
trical shock or fire, do not expose the
fixture to rain or moisture.
ì
The housing must be replaced if it is
visibly damaged.
ì
Do not look directly into the LED light
beam while the fixture is on.
Warning
Wait at least five minutes after having
switched off the fixture before opening it.
The housing, the lenses, or the ultraviolet
filter must be replaced if they are visibly
damaged.
Caution
There are no user serviceable parts
inside the fixture. Do not open the
housing or attempt any repairs yourself.
In the unlikely situation that your unit
may require service, please contact your
nearest dealer.
2. TECHNICAL SPECIFICATIONS
ì
3 different effects in one fixture: Derby
Effect, Moon Flower, Strobe
ì
6 DMX Channels for multi effect lights
ì
Quad-sided derby effect that
constantly rotates multi-colored
beams around the dance floor
ì
Independent control of the 3 different
effects
ì
User-selectable colors in stand-alone
allow customized looks without a DMX
controller
ì
Power linking to supply mains voltage
to multiple units
ì
4 operational modes: DMX, Master/
Slave, Sound-activated, Stand-alone
ì
Electronic dimming: 0-100%
ì
Light Source:
ì
Derby effect:
2 × 9W three-in-one LEDs with a
rated lifecycle of 60,000hrs
ì
Strobe effect:
36 × 5mm ultra brightness white
LEDs
ì
Moon flower effect:
64 × 5mm ultra brightness LEDs
(16 red, 16 green,16 blue, 16 white)
ì
Power supply: 100 - 240V AC, 50-60Hz
ì
Power consumption: 30W
ì
Packing size (L×W×H):
245×245×240mm
ì
Weight: 3.4kg
3. INSTALLATION
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able
to support a load of 10 times the unit’s
weight. Also always use a safety cable
that can hold 12 times the unit’s weight
when installing the fixture.
The equipment must be attached by
professionals, and in a place which is out
of people’s reach and where no one has to
pass by or under it.