eagletone.com
eagletone.com
EAGLETONE FLATLED 56
EAGLETONE FLATLED 56
User’s manual
User’s manual
MultipleX) is the standard language allowing communication between a controller and
all kinds of DMX products from different manufacturers. The order in which fixtures are
connected in a DMX line does not influence the DMX addressing. For example, it does not
matter if the last selected address is at the beginning or in the middle of a DMX line, the
controller will always recognize the fixture by its address.
XLR WIRING
XLR male socket
XLR female socket
1. Ground
2. Cold
3. Hot
1. Ground
Pin 1 = Ground
Pin 2 = Data Complement (negative)
Pin 3 = Data True (positive)
STAND-ALONE MODE
Below all dip switch settings for stand-alone use (without controller)
UNPACKING
Thank you for purchasing our FLATLED56. Every FLATLED56 has been carefully tested and
shipped in perfect operating condition. When receiving our products, carefully check the
shipping carton for damage that might have happened during transport. In case of damage,
inspect the fixture for any damage or missing accessories necessary to operate it. Please do
not take any action without first contacting us.
INTRODUCTION
The FLATLED56 is compact, lightweight and very easy to use. It is ideal for any rental job or
installation. The unit can be controlled by any DMX controller or used in stand-alone mode.
CAUTION!
Do not attempt any repairs yourself! Doing so will void your manufacturer’s warranty. In the
unlikely event your unit may require service, please contact us.
WARNING!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or
any moisture. Please read this user manual carefully to familiarize yourself with the basic
operations of this unit.
SAFETY PRECAUTIONS
• Do not expose this unit to rain or other moisture.
• Before plugging to power, be sure the local power outlet matches with the required voltage
of the unit.
• Do not remove the cover under any circumstances in case you are not qualified to do so.
• Never connect to power when the cover is removed.
• Never use this unit if it becomes damaged.
• Never connect this unit to any kind of dimmer- and/or power-pack.
• If the unit will not be used for a long time, disconnect it from power supply.
• Always mount this unit safe and stable, and make sure the area will have proper ventilation.
Make sure this unit will not be mounted in areas close to heat sources such as lighting
fixtures, amplifiers, heat registers, stoves and radiators.
• Always contact us in case you have any doubts.
GENERAL INSTRUCTIONS
First familiarize yourself with the basic operation principles of this unit by reading the attached
user manual carefully. These instructions contain important safety information regarding the
use and maintenance of this unit.
SET UP
• Before plugging this unit to power make sure the voltage in your area matches the required
voltage for the FLATLED 56. Please always make sure the unit voltage matches your area
outlet voltage before attempting to operate the unit.
• There are 2 ways to control your FLATLED56. The first option is by “stand-alone” function
and, probably the most used option, by an external controller via DMX. DMX (Digital
