17
FUNCTION MODE
The Function Mode gives you access to other features on your piano.
Press the SETUP button to enter the functionality setup mode. Press the SETUP button repeatedly to access
the items you wish to set.
Press the
▲/▼
buttons to select options or set values for the items. When you enter the next item by pres-
sing the SETUP button another time, the setting for the previous item will be saved. Press any button except
▲/▼
and SETUP to exit the Function Mode and return to the voice selection mode. The following functions
can be selected in the Function Mode:
KEYBOARD TOUCH SENSITIVITY MODE
The piano’s keyboard is sensitive to the velocity at which you hit the keys and correlates it to the output
volume of the note being played.
When entering this mode by pressing the SETUP button, the display shows «tch».
Four types of touch sensitivity are available:
Standard –
That is the standard setting which is the most similar to an acoustic piano and therefore it is the
default setting. It is displayed as «Std»..
Soft –
Generates the same volume by softer touch. It is the most sensitive touch mode. It is displayed as
«SFt».
Hard –
Generates the same volume by harder touch. It is the least sensitive touch mode. It is displayed as
«Hrd».
Fixed –
Non-touch-sensitive keyboard. The volume is fixed for instruments such as organs or harpsichords
and for playing some contemporary music. It is displayed as «no».
Use the
▲/▼
buttons to select the desired type.
MASTER TUNING
This function allows you to adjust the piano’s pitch to match recordings or other instruments in an ensemble.
When you enter this mode by pressing the SETUP button, the display shows «tun». Use the
▲/▼
buttons
to set the desired tuning value ranged from - 64 to 64. Press the
▲
and
▼
buttons simultaneously to recall
the default setting 0.
OCTAVE
The octave shift function will transpose the entire piano one octave down or up.
When you enter this mode by pressing the SETUP button, the display shows «Oct». Use the
▲/▼
buttons to
set the desired octave shift, ranged from - 2 to 2. The default setting is 0.
