background image

Alarm Page

If the alarm system is triggered while armed, an Alarm Page will be sent to the remote 
control. When the remote receives an Alarm Page, the LCD icons will display the alarm 
system status information and the remote control will generate beeps. 

Page Recognition (Acknowledgement)

To clear a page alert/notification, quickly press any button on the remote control. This 
can be performed at any time during or after the page notification has occurred.
The remote control will not send a command to the system at this time; it will only clear 
future repeats of the page notification. The next time a button is pressed on the remote 
control it will send a command to the system.

If programmed with the feature, arming the system within 5 minutes the 2-way remote will 
provide 1 beep sound per minutes indicate 2-way remote within range.  

Note: 

If the 2-way remote out of range ,  the 2 beeps/ 3cycles and flashing icon           will 

           given.  However, afterwards if the 2-way remote detect the signal again from the 
           system, 1 beep sound will be provided and flashing icon         will be off to indicate the 
          2-way remote is within range.           
    

Disable remote receiving

You may turn off the 2-Way remote receiving signal from the main unit. Press button 
             simultaneously for 2sec. until one long beep is heard. Remote receiving is now 
disabled.  To turn on receiving again, Press button                simultaneously until two long 
beep is heard, remote receiving is now enable.  

Remote button 1.2.3 on/off

For safety purpose, this 2-way remote can be lockout the remote button in order not to 
mis-touched the buttons. Press button        for over 2sec. until one beep is heard, remote
button is now locked. To turn on remote button, press button        for over 2sec. unitl two
beeps is heard, remote button is now unlocked.

Check in-range notification (programmable)

       Display                   Beeps       Vibrations               Trigger

Sensor warning

Shock sensor triggering

Trunk switch triggering

Door switch triggering

Hood switch triggering

Ignition triggering

5 short

Melody 1 

Melody 2

Melody 3

Melody 4

Melody 5

1 times

1 times periodically

2

5 times periodically      

 times periodically

3 times periodically

4 times periodically

-5-

Programming 2-way remote

Summary of Contents for E1 Plus






















Reviews: