• Pressing Button 1 enables selection of 20 Different Static colours
• Pressing Button 2 once will switch the light on pressing it again for 3 seconds will turn the
light off
• Pressing Button 2 when in Static Colour Mode will give 5 different level of brightness
• Pressing button 2 when in Dynamic Mode will give 5 different speeds
• Pressing button 3 enables selection of 19 different modes
MAINTENANCE
There are no user serviceable parts in this product. Periodically check the product for LED failure
and damage. If any of the LED’s have failed or the product is damaged in anyway switch off
and disconnect from the mains supply. To clean the product, switch off and disconnect from the
mains supply. Using a slightly damp cloth gently wipe over. Do not use bleach, solvent based
cleaners or strong detergents. These may damage the product and invalidate the warranty. If
the mains lead is damaged, it must be replaced by the manufacturer or and authorised service
centre.
Tape Dimensions: ..........................................................................2.8 x 10 x 1000mm (2 x 500mm)
Weight: .....................................................................................................................................0.1kg
Input: ...............................................................................................................................5V via USB
Power Consumption ......................................................................................................... 0.2A (1W)
SERVICE WARRANTY
Electrovision Ltd. guarantees the product free from defects in materials and workmanship for
a period of twelve months. Should this product be operated under conditions other than those
recommended, or any attempts are made to service or modify the product, then the warranty
will be rendered void. The product you buy may sometimes differ slightly from illustrations.
This warranty is in addition to, and does not affect, your statutory rights. Our guarantee is
administered by our retailers. If your product arrives damaged, you must contact the retailer
from whom you bought it. The retailer’s contact details will be on the invoice that arrived with the
product, or on the e-mail you received when you placed the order. Do not contact Electrovision,
only your retailer can arrange a replacement. If the product needs to be repaired or replaced, you
must contact the retailer from whom you bought it. If you have just received your product and
require technical help in using it, please call our Help Desk on (0845) 459 4816
Electrovision Ltd
Lancots Lane
Sutton, St. Helens
Merseyside
WA9 3EX
www.electrovision.co.uk
RGBLED
5V
MODE
DEMO
SPEED
SPEED
1
2
3
CONTROL
3 buttons marked
1. Mode/ Demo
2. Speed/ brightness /on-off
3. Speed
