Eagle 1000A, Operation Manual

Page: 24 / 43

- 24 -
4.4 Turntable & Carriage Adjustment
Test Operation
Turntable
▪
Turn on the power
▪
Verify there is no play in the turntable and that the fasteners are tight.
▪
The chain tension controls the amount of play in the turntable. The chain should have no more
than ±0.25" of play.
o
If greater than ±0.25" of play, tighten the chain using the chain adjustment screw located at
the back of the frame.
o
Fig. 5-1
Table Chain Adjustment
▪
Loosen the four holding screws of the turntable motor using a 6mm Allen Wrench.
▪
Turn the chain tension screw using an 8mm Allen Wrench.
o
Clockwise adjustment will tighten the chain and counter-clockwise will loosen the chain.
▪
After adjusting to an appropriate position, tighten the turntable motor holding screws.
Carriage Chain Adjustment
Press the carriage up
button to send the film
carriage up the mast. Press the carriage down button
to send the film carriage down
the mast.
▪
Raise the carriage and lower the carriage