Eagle 100 Series, Operation Manual, Page: 8 / 18

- 8 -
4. Operation
4.1 Operator Controls
The control panel is located on the left-hand side of the front panel of the machine.
1. Power Switch
a. Press the power switch to turn on power to the electrical circuits and the electric motor.
The button will illuminate to show that power has been turned on.
2. Manual Feedback / Reset Switch
a. When lit green, strap can be fed back into the machine. When lit yellow, the button can
be pressed to reset the machine.
3. Manual Feed
a. When in “Reset” mode (green light is illuminated), the Manual Feed button, pressing the
button will cause strap to be manually fed.
4. Length Adjustment Knob
4.2 Cooling Time Adjustment
The cooling time adjustment on your machine allows the user to adjust the cooling time to meet their
strapping requirement. By turning the knob clockwise, the cooling time can be increased.
4.3 Motor Stop Time Dip-Switch Adjustment
The motor stop time adjustment on the machine allows the
user to adjust the motor stop time.
Note: Always power down the machine before adjusting
any dip-switches!